МТ-HP4223A
• To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not use near explosives and flammable materials.
• Do not move the appliance until it is completely cool.
• Do not touch the metal parts of the device, because they get very hot during operation.
• Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
• Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
CLEANING AND MAINTENANCE
• Unplug the appliance from the power supply before cleaning.
• Let the unit cool down completely.
• Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
USE THE DEVICE
Standby mode
After you have connected the device's plug to the main supply, the device is in standby mode. A signal will sound. The display will show"--" , and the “ON/OFF”indicator light light up in the same time.
Select cooking Function
●Put a suitable pot on the cooking zone.
●Press
button.
●Press the
button, the display shows “P7”. Rotate the knob to set the regulated power. It have 8 levels powers P1/P2/P3/P4/P5/P6/P7/P8.
●CHILD LOCK: Press
key in standby mode to enter child lock mode. Pressing other keys is invalid. If you want to cancel, press again. Press the key for 3 seconds to cancel. When lock mode, the
display shows “LO”.
PAN RECOGNITION
The device has a pot recognition function. It gives several warnings to indicate that the cookware has been removed. The message“E0" appears on the display. For safety reasons, the appliance will switch to
standby mode after about 60 seconds. The fan may continue running. In this context, please pay attention to the following:
WARNING: After use, the hot plate is to be switched off by means of its regulation and control devices (button
) and not just by pan recognition.
WARNING: Hazard of burns!
Because of the heat radiated during cooking, dangerously high temperatures may occur at the cooking zone after the cooking cycle.
Choosing the dishes
In order for the induction cooker to work correctly, it is necessary to use dishes whose bottom is ferromagnetic (attracts a magnet).
Dishes made of the following materials are not suitable for induction cookers: clay, glass or aluminum.
Do not use the following types of pots:
●Pots with curved (convex/parabolic) bases.
●Dishes with a base diameter of less than 12 cm. The recommended diameter of the base is from 12 to 22 cm.
●Dishes on legs.
ATTENTION: Dishes made of glass, ceramics, non-ferrous metals, with a bottom made of aluminum or copper, diches with bottom diameter less than 12 cm is NOT SUITABLE!
To Next Page
Loading...