occur at the cooking zone after the cooking cycle. Hazard of burns!
●Potential damage to your health! People wearing pacemakers must not use this cooker. You should keep a minimum distance of 60 cm to the appliance when it is in use.
CLEANING AND MAINTENANCE
• Unplug the appliance from the power supply before cleaning.
• Let the unit cool down completely.
• Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
USAGE
After you have connected the device's plug to the main supply, the device is in standby mode. A signal will sound. The display will show"- - - -".
● Put a suitable pot on the cooking zone.
● Press
button.
● Press
button, then choose function. This hot plate is specially designed with 6 cooking functions which are the most popular cooking methods:
MULTICOOK: Initial setting start 270℃, you can select temperature from 80 to 270℃ with the rotate switch. There are 9 levels of temperature are selectable: 80/100/120/160/180/200/220/240/270°C.
FRY: Initial setting start 200℃, you can select temperature from 80 to 270℃ with the rotate switch.
STEW: Initial setting start 1600W, you can select power from 200W to 3200W with the rotate switch. There are 9 levels of power are selectable: 200/600/800/1000/1300/1600/1800/2100/3200W.
SOUP/BROTH: Initial setting start 1800W.
BOIL: Initial setting start 1800W.
CHEF: Initial setting start 800W.
● LOCK: In standby mode, press
key for 3 seconds to enter child lock mode. Pressing other keys is invalid. If you want to cancel, press the "LOCK" key again for 3 seconds to cancel.
●STOP: In the heating working state, touch the key to temporarily stop the heating of the cooker, and touch again when the nixie tube displays "STOP". key can restore the cooker to its original
working state.
Set up timer/preset
●Press “ON/OFF" button.
●Press
button, then choose function MULTICOOK / FRY / STEW, then press "TIMER" button. The display shows"0:00". Rotate the switch to set the time.
NOTE: This timer means the device will keep working for the time you input. After the set time has elapsed, the device will come back to standby mode. You can select from 0-3 hours.
●When you choose function BOIL / SOUP/BROTH / CHEF, then press "TIMER/PRESET" button, the display shows"0:00". Rotate the switch to set the time. The display will show the desired setting.
NOTE: This setting means the device will come back to standby mode immediately after you input the time. After the set time has elapsed, the device will start to work under the functions you selected. You can
select from 0-24 hours.
●You may change the previous timer/preset at any time. The other settings will remain.
●To cancel the timer/preset, select the display to "0:00". The cooking plate will keep the function which you have chosen before. You may also turn the appliance off directly with the“ON/OFF" button.
PAN RECOGNITION
The device has a pot recognition function. It gives several warnings to indicate that the cookware has been removed. The message“E0" appears on the display. For safety reasons, the appliance will switch to
standby mode after about 60 seconds. The fan may continue running. In this context, please pay attention to the following:
WARNING: After use, the hot plate is to be switched off by means of its regulation and control devices (ON/OFF button) and not just by pan recognition.
WARNING: Hazard of burns!
Because of the heat radiated during cooking, dangerously high temperatures may occur at the cooking zone after the cooking cycle.
To Next Page
Loading...