Martha Stewart Lionel User Manual

ASSEMBLY INSTRUCTIONS
Page 1 of 3
Description: Lionel Bar Cart
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Description
QTY
Parts List
Item
1
P1
1
2
Casters
Top Glass
Top Frame
Left Side Frame
Hardware List
4
1
1Ceramic
Back Rails
Bottom Frame
Right Side Frame 1
1
QTY
Description
Item
8
H1
Short Bolts
Ø1/4" *1/2"
Allen Wrench 4mm
1
4
Flat Washers
Ø1/4"
4
4
Countersunk Bolts
Ø1/4" *3/4"
Clear Plastic Pad
6
1
Open Wrench
P2
P3
P4
P5
P6
P7
P8
H2
H3
H4
H5
H6
H7
Long Bolts
Ø1/4" *3/4"
Label W/ "Top"
Label W/ "Bottom"

Martha Stewart Lionel Specifications

General

Brand	Martha Stewart
Model	Lionel
Category	Outdoor Cart
Language	English

Summary

Important Safety Instructions

Pre-Assembly Preparation

Assembly Procedures

Step 1: Assemble Frame and Rails

Connect side frames to top and bottom frames, and attach back rails using specified bolts.

Step 2: Attach Casters

Securely attach casters to the side frames using flat washers and an open wrench.

Step 3: Place Top Glass and Pads

Position the assembled cart upright, tighten bolts, add plastic pads, and place the glass top.

Step 4: Place Ceramic Shelf

Gently place the ceramic shelf onto the bottom frame of the bar cart.