Martha Stewart MTS-EWC15 User Manual

1
© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
Model MTS-EWC15 Form No. SJ-MTS-EWC15-880E-MR1
OPERATOR’S MANUAL
ELECTRIC WOOD CHIPPER + SHREDDER
15-AMP | 17:1 REDUCTION RATIO
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this wood chipper + shredder
must read, understand, and follow these instructions in
their entirety. Failure to follow these instructions may result
in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL
INJURY.
Notice the personal safety alert symbol
m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
mWARNING! Wear appropriate personal hearing
protection during use. Under some conditions and duration of
use, noise from this product may contribute to hearing loss.
mWARNING! The rotating blades can cut you. Keep
hands and feet away from the hopper and the discharge chute.
Before using the wood chipper + shredder, familiarize yourself
with the controls, especially how to stop the unit in an
emergency. The only individuals who should use the wood
chipper + shredder are those who thoroughly understand
these instructions and know how to properly operate the unit.
Children should never be allowed access to the wood chipper
+ shredder.
Retain this manual for future reference and reread it at the start
of each chipping season.
General Safety
1. Avoid dangerous environments – Do not use the wood
chipper + shredder in rain or in damp or wet locations. Do
not operate the unit in gaseous or explosive atmospheres
or use the unit near ammable or combustible liquids.
Motors in these tools normally spark, and the sparks
might ignite fumes.
2. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
3. Use safety glasses – Also use dust mask, safety
footwear, snug-tting clothing, protective gloves, hearing,
and head protection.
4. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
5. Disconnect the tool – Disconnect the wood chipper +
shredder from the power supply when it is not in use,
before servicing it, when changing accessories, and when
performing any other maintenance task.
6. Do not abuse the cord – Never carry the wood chipper
+ shredder by the cord or yank the cord to disconnect it
from the receptacle. Keep the cord away from heat, oil,
and sharp edges.
7. Stay alert – Watch what you are doing. Use common
sense. Do not operate the wood chipper + shredder when
you are tired or under the inuence of drugs, alcohol, or
other medication.
8. Store idle tool indoors – When not in use, the wood
chipper + shredder should be stored indoors in a dry and
high or locked-up place out of the reach of children.
9. Maintain the wood chipper + shredder with care –
Keep the cutting edges sharp and clean for optimal
performance and to reduce the risk of injury. Inspect the
extension cord periodically and immediately replace it
if damaged. Keep the handles dry, clean, and free from
oil and grease. Follow the additional recommendations
described in the Care + Maintenance section of this
manual.
10. Check for damaged parts – Before further use of the
appliance, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may aect its
operation. A part that is damaged should be properly
repaired or replaced. Contact the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
11. Lighting – Only operate your wood chipper + shredder in
daylight or good articial light.

Martha Stewart MTS-EWC15 Specifications

General

Sheet Capacity	15 sheets
Shred Size	5/32" x 1-9/16" (4mm x 40mm)
Auto Start/Stop	Yes
Overload Protection	Yes
Jam Protection	Yes
Can Shred	Paper, Credit Cards, Staples, Paper Clips

Summary

Safety Instructions

General Operator Safety Guidelines

Covers environmental conditions, attire, alertness, tool care, and general warnings.

Specific Hazard Warnings and Precautions

Addresses noise, rotating blades, keeping clear of openings, and preventing clogs.

Personal Safety During Operation

Focuses on keeping body parts away, using the paddle, and handling material safely.

Electric Safety

Extension Cord and Outlet Safety

Guidelines on GFCI, outdoor-rated cords, polarized plugs, securing cords, and avoiding adapters/modification.

Shock Prevention Measures

Advice on avoiding body contact with grounded surfaces and replacing damaged cords.

Double-Insulated Appliances

Understanding Double Insulation

Explains the two insulation systems, servicing requirements, and use of identical replacement parts.

Safety Symbols Explained

Understanding Key Safety Icons

Explanation of various safety symbols used in the manual and on the product for safe operation.

Know Your Electric Wood Chipper + Shredder

Component Identification

Illustration and list of major components and controls of the wood chipper.

Technical Data

Specifications and Ratings

Detailed technical specifications including motor, voltage, speed, dimensions, and weight.

Unpacking

Carton Contents Checklist

List of items expected in the carton and instructions for checking for damage.

Packaging Material Handling

Note on keeping packaging material and its disposal.

Assembly

Wheels Fitting Instructions

Step-by-step guide for attaching the wheels to the shredder stand.

Stand Assembly Fitting

Instructions for attaching the main body to the stand assembly.

Operation

Starting and Stopping Procedures

Guidelines for safely starting and stopping the wood chipper + shredder.

Powering the Unit On and Off

Steps for connecting power, using the safety switch, and disabling the unit.

Basic Shredding Procedure

How to safely shred material, including wearing protection and inserting material into the hopper.

Using the Paddle for Feeding

Instructions on using the paddle to push material into the hopper safely.

Shredding Material Guidelines

Tips on material types, feeding techniques, and preventing clogs.

Overload Protection

Restarting After Overload

How to restart the unit after the overload protection has activated.

Care + Maintenance

Cleaning Procedures

Instructions for cleaning the unit, including the hopper and ventilation slots.

Hopper Cleaning

Steps to remove the hopper for cleaning the inside of the unit.

Cutting Blade Replacement

Detailed instructions for removing, reversing, and installing the reversible cutting blades.

Replacement Parts Information

Guidance on purchasing original replacement blades and parts.

Storage

Preparing the Unit for Storage

Steps to clean, inspect, and store the chipper properly in a dry, cool area.

Service and Support Information

Customer Service Contact and Product Identification

How to contact customer service and record model/serial numbers for support.

Troubleshooting

Motor Not Running Issues

Possible causes and remedies for the motor failing to start.

Chipping Material Feed Problems

Solutions for when the chipper is not pulling in material due to jams or blockages.

Inefficient Cutting Issues

Troubleshooting for blades cutting inefficiently, suggesting blade reversal or replacement.

Optional Accessories

Accessory Compatibility Warning

Warning to use only authorized replacement parts and accessories for safety and performance.

Available Accessories

Lists available accessories like replacement blades, paddles, and extension cords with their models.

Snow Joe® + Sun Joe® Customer Promise

Warranty Overview

Details the limited warranty terms, coverage, and options for repair or replacement.

Product Registration

Encourages product registration for better customer service.

Warranty Exclusions

Lists conditions and circumstances not covered by the warranty.