INTRODUCTION
The SE350 voltage regulator is an encapsulated electronic voltage regulator that controls the
output of a brushless AC generator by regulating the current into the exciter field.
SPECIFICATION SE350 REGULATOR
Sensing & Power Input 190-240 Vac
Burden 500 VA
Output Power- Continuous 73 Vdc at 3.5 Adc (255w)
Output Power - Forcing(240 Vac Input Power) 105 Vdc at 5 Adc (525w)
Regulation 1 .0%
Remote Voltage Adjustment Range ± 10% with 2000 ohm rheostat
± 5% with l000 ohm rheostat
Frequency Compensation Adjustable
Roll off frequency 54-61 Hz for 60 Hz
45-51 Hz for 50 Hz
Operation Weight6.5 oz.
Operating Temperature - 40°C to + 60°C
Storage Temperature - 65°C to + 85°C
Power Dissipation 8 watts maximum
Size 3.94" L X 2.66” W X 2.20: H
Voltage Buildup Internal provisions forautomatic voltage
build up from generator residual voltage as
low as 10 Vac.
EMI Suppression Internal Electromagnetic Interference
Filter (EMI Filter )
WARNING
TO PREVENT PERSONAL INJURY OR EQUIPMENTDAMAGE
ONLY QUALIFIED PERSONNEL SHOULD
INSTALL, OPERATE, OR SERVICE THIS DEVICE.
CAUTION: DO NOT megger or high-pot the generator with the regulator connected.
DO NOT high-pot the regulator.
To Next Page
Loading...