Initialization
To use the "Finger Kick", it is important to link it with the button
of the remote.
Procedure:
1. On the remote, push simultaneously on the chosen button
and the programming button (central button for the
PT3000 and BEAGLE MASTER or lower button for the
TT1000).
2. Push until the LCD screen flickers.
3. Push more than one second on the button of the "Finger
Kick". CAUTION, you have to do that during about ten
seconds. In case of failure, begin again on step 1.
4. When the LCD screen stops to flicker, the "Finger
Kick" is connected to the button of your remote.
To Next Page
Loading...
