Remark:
1. The collar-receiver has to be synchronized to the remote
to use the "Finger Kick"
2. The receiver must be on more than 50 cm of the remote
to ensure a good connexion between the two elements.
3. To connect the "Finger Kick" to another remote, you
must take away the previous remote from at least six
metres and begin again the initialization procedure.
Use
Push on the button of the "Finger Kick" as you do it to use the
remote. There is no button "on-off". When you push on the button,
you engage automatically the functioning.
From the last pushing, the system reacts instantaneously at every
touch. After ½ hour in stand-by, the react time is approximately of
one second.
After 4 hours in stand-by, you must reactivate the system by
pushing on a touch of the transmitter.
To Next Page
Loading...
