PN: 35001513: M2GO-M2PC Replace Dongle Rev. A
M2GO/M2PC™ Controller
Replacing Dongle with the new Dongle type
Symptom
When the M2GO/M2GO dongle has to be replaced with a new dongle type, an adapter PCB is
used.
Solution
Follow these instructions to replace the Dongle.
Tools needed
Torx T-10 screw driver.
Anti-Static Precautions
Important! Static electricity can destroy electronic
components. Follow these ESD precautions to prevent damage
to the product and injury to the user.
Carry out the service at an anti-static workstation.
Wear a grounded anti-static wristband.
Touch a grounded conductor every few minutes to discharge any
static buildup.
Hold components by their edges only. Do not touch the surfaces or
any of the contacts of the PCBs.
To Next Page
