Need help?Do you have a question about the Martin M3910 and is the answer not in the manual?
General| Brand | Martin |
|---|---|
| Model | M3910 |
| Category | Power Tool |
| Language | English |
Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols used in the manual.
Mandatory procedure to turn off, lockout, tagout, blockout, and test all energy sources before installation.
Advises testing the atmosphere for gas or dust before cutting or welding in enclosed areas to prevent explosions.
Specifies bolt sizes, torque requirements, and tightening sequence for secure vibrator mounting.
Procedure for installing the BBAC cable kit to secure the vibrator and prevent falls.
Instructions for wiring according to NEC, finding wiring diagrams on the nameplate, and selecting correct voltage.
Procedure for properly grounding the vibrator and installing wire connectors and covers.
Importance of installing overload protection per NEC Article 430 to prevent vibrator damage and voiding warranty.
Guide to adjusting eccentric weights for 00-10 frame models to achieve desired force output.
Instructions for adjusting eccentric weights on 20-105 frame models for optimal force and efficiency.
Steps for initial operation, checking for noise, and monitoring line current against nameplate ratings.
Details on lubrication intervals, grease types (Kluber), and amounts for different vibrator models.
To Next Page