To Next PageTo Next Page
Need help?Do you have a question about the MARTINDALE MM34 and is the answer not in the manual?
General| Brand | MARTINDALE |
|---|---|
| Model | MM34 |
| Category | Multimeter |
| Language | English |
Recommended calibration interval is 12 months. Service is available on a chargeable basis.
No user serviceable parts. Return to Martindale Electric for repair if faulty.
Store in warm, dry conditions away from heat/sunlight, with battery removed.
Faults in manufacture and materials are guaranteed for 2 years from invoice.
Clean exterior with a dry cloth. Never use liquid solvents or detergents.
Replace 9V battery when low battery indicator shows; disconnect leads first.
Replace blown overload protection fuses (F1 for µA/mA, F2 for 10A).
General purpose digital multimeter for AC/DC voltage, DC current, and resistance measurement.
Examine shipping carton and MM34 for any signs of damage upon receipt.
Refer to Section 4.2 for detailed battery installation instructions.
Read safety information, check for damage, avoid touching exposed parts, and work within meter limits.
Connect leads to VΩ/COM, select function/range, connect to unit under test.
3.5 digit LCD, max reading 1999, automatic polarity detection.
Operates 0-50°C, <70% RH. Stores -20-60°C, 0-80% RH (battery removed).
Details ranges, resolution, accuracy, input impedance, and overload protection for DC/AC volts.
Specifies ranges, accuracy, input protection, and overload protection for DC current and resistance.
Details test current, accuracy, open circuit voltage for diode test, and ranges for battery test.
Complies with IEC standards, EU Directives (EMC, LVD), and notes on electromagnetic interference.
