Need help?Do you have a question about the MartinLogan Helos 12 and is the answer not in the manual?
Audio Specifications| system frequency response | 47–20, 000 Hz ± 3 dB |
|---|---|
| sensitivity | 89 dB @ 2.83 volts/ meter |
| impedance | 4 Ohms. Compatible with 4, 6, or 8 Ohm rated amplifiers. |
| crossover frequency | 2, 800 Hz |
Driver Specifications| high-frequency driver | 1” (2.5cm) neodymium soft dome |
|---|---|
| low-frequency driver | 6.5” (16.5cm) high-rigidity aluminum cone with extended throw drive assembly, thermal protection. |
| binding post inputs | Push style binding posts, accommodates wire up to 5AWG. |
Power and Amplification| suitable amplifier range | 20–200 watts |
|---|---|
| maximum power handling | 100 watts |
| components | Custom air core coils, polyester caps |
Weight and Dimensions| weight | 4.5 lbs. (2 kg) |
|---|---|
| overall size | 9.1” x 4.6” (23.1cm x 11.8cm) |
| required opening with tolerance | 8.35” (21.2cm) |
| projection from wall surface | 0.2” (4.5mm) |
| depth behind wall surface | 4.4” (11.2cm) |
Audio Specifications| system frequency response | 47–20, 000 Hz ± 3 dB |
|---|---|
| sensitivity | 89 dB @ 2.83 volts/ meter |
| impedance | Mono: 4 Ohms. Compatible with 4, 6, or 8 Ohm rated amplifiers. Stereo: 8 Ohms per channel. Compatible with 4, 6, or 8 Ohm rated amplifiers. |
| crossover frequency | 2, 600 Hz |
Driver Specifications| high-frequency driver | Two 0.78” (1.9cm) neodymium soft dome |
|---|---|
| low-frequency driver | 6.5” (16.5cm) high-rigidity aluminum cone with extended throw drive assembly, thermal protection. |
| binding post inputs | Push style binding posts, accommodates wire up to 5AWG. |
Power and Amplification| suitable amplifier range mono | 20–200 watts |
|---|---|
| suitable amplifier range stereo | 20–100 watts per channel |
| maximum power handling mono | 100 watts |
| maximum power handling stereo | 50 watts/channel |
| components | Custom air core coils, polyester caps |
Weight and Dimensions| weight | 4.5 lbs. (2 kg) |
|---|---|
| overall size | 9.1” x 5.1” (23.1cm x 12.8cm) |
| required opening with tolerance | 8.35” (21.2cm) |
| projection from wall surface | 0.2” (4.5mm) |
| depth behind wall surface | 4.9 po (12.3 cm) |
To Next Page