13
Specifications*
System Frequency Response . . . . . . . .
Sensitivity. . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . .
Low-Frequency Driver . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . .
Maximum Power Handling . . . . . . . . .
Weight. . . . . . . . . . . . . . . . . . . . . . . .
Overall Size (height x width x depth) . . .
Required wall opening (including
tolerance). . . . . . . . . . . . . . . . . . . . . .
Projection from wall surface . . . . . . . .
Depth required behind wall surface. . .
*Specifications are subject to change without notice.
33 Hz –125 Hz ±3dB when used with
ML-300 Amplifier
87dB
8 ohms nominal
Two 7˝ (17.8cm) polypropylene cones
with double roll surround
Push style accommodates wire up to
12AWG
150 Watts
8.8 lbs. each (4 kg)
16.7˝ x 9.25” x 4.4˝
(42.5 x 23.5 x 11.1cm)
8.125” x 15.625” (20.6 x 39.6 cm)
0.5˝ (1.1cm)
3.9˝ (9.9m)
To Next Page
Loading...
Need help?
General
