MartinLogan ML-60 - ML-67 Specific Installation; ML-60;ML-65 Installation

6
ML-67 ONLY: Orient speaker so sound is directed toward primary listening
position.
b) Hold speaker in place and alternately tighten each screw (Fig. 8b).
INSTALLATION: ML-60 and ML-65 (Round and Rectangular)
a) Push speaker assembly through hole until flange is flush with the wall (Fig. 9a)
b) Holding speaker in place, alternately tighten each screw (Fig. 9b)
8. Gently press the grill into place.
Figure 7a. Figure 7b.
Figure 8a.
Figure 8b.
Figure 9a. Figure 9b.