Need help?Do you have a question about the MartinLogan Motion 35XT and is the answer not in the manual?
Explains the use and potential prohibition of jumper clips for speaker connections.
Details how to connect speakers using a single wire per driver for optimal sound.
Describes connecting speakers with separate wires for high and low frequencies.
Explains how to bi-amplify speakers using internal crossover components for ultimate performance.
Discusses active bi-amplification, recommending against it due to performance degradation.
Recommended break-in period for speakers to reach optimal performance levels.
Guidance on placing speakers on stable, level surfaces and avoiding CRT televisions.
Details on the limited 90-day and optional 5-year warranty coverage and registration.
Information regarding servicing products in countries other than the original purchase location.
Location of the serial number for warranty and service reference.
Explains the use and potential prohibition of jumper clips for speaker connections.
Details how to connect speakers using a single wire per driver for optimal sound.
Describes connecting speakers with separate wires for high and low frequencies.
Explains how to bi-amplify speakers using internal crossover components for ultimate performance.
Discusses active bi-amplification, recommending against it due to performance degradation.
Recommended break-in period for speakers to reach optimal performance levels.
Guidance on placing speakers on stable, level surfaces and avoiding CRT televisions.
Details on the limited 90-day and optional 5-year warranty coverage and registration.
Information regarding servicing products in countries other than the original purchase location.
Location of the serial number for warranty and service reference.
General| Type | Bookshelf Speaker |
|---|---|
| Nominal Impedance | 4 Ohms |
| Recommended Amplifier Power | 20 - 250 Watts |
| High-Frequency Transducer | 1.25" x 2.4" Folded Motion XT tweeter |
| Components | High-frequency transducer, Low-frequency transducer |
| Binding Post Inputs | 5-way binding posts |
| Horizontal Dispersion | 90° |
| Vertical Dispersion | 80 degrees |
| Frequency Response | 50 Hz – 25 kHz ± 3 dB |
| Sensitivity | 92dB/2.83V/m |
To Next Page