Need help?Do you have a question about the MartinLogan Motion 50XT and is the answer not in the manual?
Explains the use and removal of jumper clips for speaker connections.
Details how to connect speakers using a single set of speaker wires.
Describes connecting speakers with two sets of wires, bypassing jumper clips.
Explains bi-amplification using internal passive crossover elements.
Discusses active bi-amplification, noting it is not recommended by the manufacturer.
Recommends a break-in period for speakers at a specific volume level.
Provides instructions for placing speakers on a stable, level surface.
Guides on orienting speakers for optimal sound dispersion based on listening height.
Details the 90-day and optional 5-year warranty coverage and registration.
Explains where to find the speaker's serial number for registration.
Outlines service policies, especially for use in different countries.
Explains the use and removal of jumper clips for speaker connections.
Details how to connect speakers using a single set of speaker wires.
Describes connecting speakers with two sets of wires, bypassing jumper clips.
Explains bi-amplification using internal passive crossover elements.
Discusses active bi-amplification, noting it is not recommended by the manufacturer.
Recommends a break-in period for speakers at a specific volume level.
Provides instructions for placing speakers on a stable, level surface.
Guides on orienting speakers for optimal sound dispersion based on listening height.
Details the 90-day and optional 5-year warranty coverage and registration.
Explains where to find the speaker's serial number for registration.
Outlines service policies, especially for use in different countries.
General| Type | Floorstanding Speaker |
|---|---|
| Impedance | 4 ohms |
| Horizontal Dispersion | 80° |
| Vertical Dispersion | 80° |
| High-Frequency Transducer | Folded Motion Tweeter |
| Binding Post Inputs | Dual 5-way binding posts |
| Weight | 50 lbs |
| Woofer | Dual 6.5" (16.5cm) aluminum cone with cast basket. Non-resonant asymmetrical chamber format. |
To Next Page