45
72F-74E
PEDALS
Do not “ride” the brakes by applying
them continuously or resting your foot
on the pedal. This will result in
overheating of the brakes which could
cause unpredictable braking action,
longer stopping distances, or
permanent brake damage.
Accelerator Pedal
33
33
3
This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.
6-2
Clutch Pedal
11
11
1
(for manual transmission)
The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping, or shifting the transmission
lever. Depressing the pedal disengages the
clutch.
Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear, clutch damage,
or unexpected loss of engine braking.
Brake Pedal
22
22
2
Your MARUTI vehicle is equipped with front
disc brakes and rear drum brakes.
Depressing the brake pedal applies both
sets of brakes.
You may hear occasional brake squeal
when you apply the brakes. This is a
normal condition caused by environmental
factors such as cold, wet, snow, etc.
If brake squeal is excessive and
occurs each time the brakes are
applied, you should have the brakes
checked by your MARUTI dealer.
ww
ww
w WARNING
ww
ww
w CAUTION
ww
ww
w WARNING
OTHER CONTROLS AND EQUIPMENT
70F-04-003E 70F-04-004E
To Next Page
Loading...
Need help?
General
