Maruyama B30L User Manual






 

B23,B30




 


Maruyama B30L Specifications

General

Brand	Maruyama
Model	B30L
Category	Trimmer
Language	English

Summary

Federal Emission Control Warranty Statement

Safety

Operator Safety Guidelines

Essential personal safety rules including protective gear and operational conduct.

Equipment and Fuel Safety

Safety checks for the unit, safe handling and storage of fuel.

Operating Safety Rules

Guidelines for safe usage of the trimmer/brushcutter, including clearances and movement.

Cutting Techniques and Safety

Assembly

Handlebar and Loop Handle Installation

Trimmer Head Installation

Brushcutter Blade Installation

Before Operation

Oil and Fuel Preparation

Essential steps for preparing fuel and oil, including safe handling and mixing.

Recommended Fluids and Fuel Mixture

Guidelines on oil type, fuel grade, and proper mixing ratios for the 2-cycle engine.

Starting And Stopping

Pre-Start Checks and Cold Engine Starting

Initial checks before starting and procedures for starting a cold engine.

Hot Engine Restart and Stopping Procedures

Steps for restarting a warm engine and proper methods for shutting it down.

Operation

Trimmer Operating Position and Cutting Techniques

Correct stance, grip, and methods for effective trimmer cutting.

Trimming, Mowing, and Scaling Techniques

Specific cutting methods for different vegetation types and ground contact.

Brushcutter Operating Position and Cutting Direction

Correct stance, grip, and safe movement for brushcutting to prevent kick-back.

Maintenance

Idle Speed Adjustment

Air Filter Maintenance

Spark Plug and Cooling Fin Maintenance

General Cleaning, Tightening, and Blade Sharpening

Troubleshooting

Specifications