EasyManua.ls Logo

Maruzen MEF-13E - Page 4

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power switch・・・・・・・・・・Power is “ON” or “OFF” whenever you press the power switch.
Power lamp (Yellow) ・・・・・・・・・Lit when the power is “ON”.
Hearting start switch・・・・・・・・・・・・Used to start or stop heating while the power switch is “ON”
Heating lamp (Red) ・・・・・・・・ Lit when heating isON.The heating lamp starts blinking over set temperature.
Lard switch・・・・・・・・・・・・・・・・・・・・Used this switch when you cook with lard.
Lard lamp (Yellow) ・・・・・・・・・・・・Lit when the lard mode isON.
ECO switch・・・・・・・・・・・・・・・・・・・Whenever you press the switch, the ECO mode is "ON" "OFF".
ECO lamp (Yellow) ・・・・・・・・・・・Lit when the ECO mode isON.
Extension switch・・Pressed this switch will do additional cooking for 10 seconds. Also, you can extend
cooking time of 10 seconds by pressing it during cooking.
Manual switch ・・・・・・・・・・・・・・・Used when you cook at any set except menu cooking.
Manual lamp(Yellow) ・・・・・・・・・・Lit when the manual mode isON.
Start / Stop switch・・・・・・・・・Menu cooking starts or stops if you press the switch while heating isON
Menu setting switch・・・・・・・・・・・・Set the designed menu number.
Appropriate temperature lamp(Green) ・・・・Lit when oil temperature has reach the set temperature.
Ten key switches・・・・・・・・・・・・・・Used when you input the cooking menu, temperature and time.
Menu display panel・・・・・・・・・・・・・Displayed menu number.
Timer display panel・・・・・・・・・・・・・Displayed setting time or lapsed time during cooking (Down counting)
Current temperature display panel・・・・・・・・・・・・・Displayed current temperature.
Preset temperature display panel・・・・・・・・・・・Displayed preset temperature.
Set range
Set temperature
It can be set every second between 100 to 220.Initial value180
Set timer
It can be set every second between 0min 00sec to 99min 59secInitial value0 min 0
0 sec
Time remaining of the set time is counted down every second.
If the high limit works, heater does not work even if you rise or drop
the temperature setting.
In this case, any parts might be damaged. Do NOT press the reset switch
by yourself. Contact our sales office or distributer.
CAUTION