Need help?Do you have a question about the Marzocchi Shiver 50 and is the answer not in the manual?
General| Brand | Marzocchi |
|---|---|
| Model | Shiver 50 |
| Category | Motorcycle Accessories |
| Language | English |
Offers general safety advice for motorcycle riding and proper suspension system use.
Outlines essential pre-ride checks and safety procedures for the motorcycle.
Lists and identifies all the individual components of the SHIVER 50 Factory Works fork with numerical references.
Details common fork issues, their potential causes, and recommended solutions for troubleshooting.
Presents a table outlining general maintenance operations and their recommended intervals based on usage type.
Details the steps for safely removing the cartridge unit from the fork leg after proper oil drainage.
Covers the overhaul and adjustment procedures for the cartridge unit and compression valve.
Step-by-step guide for reassembling the cartridge unit, including spring and spacer installation.
Guides on how to correctly install the fork onto the motorcycle frame and wheel assembly.
Guides on measuring SAG and adjusting spring preload for optimal suspension performance.
Details the procedure for adjusting the spring preload by repositioning a metal ring.
Explains how to adjust the rebound damping to control suspension return speed after compression.
Guides on how to adjust compression damping for stability and handling characteristics.
To Next Page