Mas-Hamilton XX-07 User Manual

1
OPERAOPERA
OPERAOPERA
OPERA
TINGTING
TINGTING
TING
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
FOR THEFOR THE
FOR THEFOR THE
FOR THE
XX
XX
X
-07/CEX-07/CEX
-07/CEX-07/CEX
-07/CEX
-07-07
-07-07
-07
HIGH SECURITYHIGH SECURITY
HIGH SECURITYHIGH SECURITY
HIGH SECURITY
ELECTRONIC LOCKELECTRONIC LOCK
ELECTRONIC LOCKELECTRONIC LOCK
ELECTRONIC LOCK
(TYPE 1F)(TYPE 1F)
(TYPE 1F)(TYPE 1F)
(TYPE 1F)
Please read all instructions carefully before putting your X-07/CEX-07 into operation.

Mas-Hamilton XX-07 Specifications

General

Direct Drive	Yes
Relock Trigger	Yes
Listing	UL Listed
Manipulation Resistance	High
Usage	Safes, vaults, and secure doors

Summary

Opening the X-07 Using the Pre-Set Combination

To Open the X-07

Step-by-step instructions for opening the lock using the pre-set combination.

If You Pass Your Target Number When Dialing

Redial Entire Combination If...

Setting Operating Mode and New Combinations

Setting the Operating Mode

Steps to set the desired operating mode for the lock.

Alternate Method to Set Operating Mode

Setting Combinations

Single Combination Mode

Instructions for setting a new combination in Single Combination Mode.

Dual/Super/Sub Mode Combinations

Instructions for setting combinations in Dual or Supervisory/Subordinate modes.

Change a New Combination During the Entry Process

Lockout Prevention

Using the X-07

Single Combination Mode

Explains how to use the lock in Single Combination Mode.

Dual Combination Mode

First Operator

Instructions for the first operator in Dual Combination Mode.

Second Operator

Instructions for the second operator in Dual Combination Mode.

Supervisory/Subordinate Mode

Unlock in Supervisory/Subordinate Mode

Steps for the Supervisory Operator to unlock the lock.

Lock Up in Supervisory/Subordinate Mode

Supervisory Operator

Instructions for the Supervisory Operator to lock up the lock.

Using the Audit Features of Your X-07

Check the Number of Successful Openings

Procedure to check the count of successful lock openings.

Check Unsuccessful Attempts Count

Procedure to check the count of unsuccessful lock attempts.

Guide to Symbols

CE Function

Normal Operation

Standard operating procedure for the lock when CE function is not active.

Combination Change

Process for changing combinations, similar to standard X-07.

Covert Entry

Explains the conditions that trigger a covert entry indication.

Resetting Covert Entry and Covert Entry Combination Change

Recovering If the Covert Entry Combination Is Forgotten

Steps to recover access when the covert entry combination is forgotten.

Guide to Symbols - CE Function