To Next PageTo Next Page
Need help?Do you have a question about the Masibus LC-12 and is the answer not in the manual?
General| Brand | Masibus |
|---|---|
| Model | LC-12 |
| Category | Test Equipment |
| Language | English |
Introductory information, legal notices, and company trademarks.
Essential safety information for using the instrument.
Important warnings regarding operation, electrical safety, and battery use.
Advisories to prevent damage and ensure proper handling of the instrument.
An overview of the calibrator's primary features and capabilities.
Steps for receiving and inspecting the instrument and its included accessories.
Details the physical layout, ports, and connection points of the LC-12 calibrator.
Explains the source and measure terminal configurations and their electrical specifications.
Describes the purpose and operation of each key on the LC-12 calibrator's keypad.
Details the LC-12's LCD screen, resolution, and other interface components.
Covers USB port usage, cable information, and how to deploy the integrated stand.
Outlines power sources, battery type, and charging methods.
Provides typical charge times and operating hours for the LC-12 battery.
Step-by-step guide on how to turn the LC-12 calibrator on and off.
Introduces the RUN page layout, status bar, and available display modes.
Explains icons in the status bar: time, errors, USB, battery, data logging.
Details function key usage and how to select different RUN display modes.
Explains the 'Measure Only' display mode, its parameters, and readings.
Describes 'Source Only' and 'Switch Test + Source' display modes and configurations.
How to use ListBox for selecting options from a list.
Guides on using EditBox for parameter value input and modification.
Details on changing decimal points and signs within EditBox fields.
Explains how to use CheckBox for binary options and RadioButtonBox for selections.
How to enter and exit the main menu and its structure overview.
Details parameters for Measure mode, including Input Type, Ranges, Scaling, and Transfer Function.
Details parameters for Source mode, covering Output Type, Ranges, Scaling, Transfer Function, and Source Type.
Settings for STEP output, including manual/auto stepping, time, size, and repeat options.
Settings for RAMP output, including hold times, rise/fall times, and repeat format.
Allows selection of different RUN display modes like Measure Only, Source Only, Measure+Source.
Configures measure display parameters: Main Display, Filter, Tare, and Additional Info.
Configures source display parameters: Main Display and Additional Info.
Configures Switch Test mode: selection, trigger voltage, and sound options.
Sets up data logging: trigger, mode, save method, sampling rate, and time.
Defines alarm limits for measurements, triggering audible and visual alerts.
Configures HART, display brightness, auto-off time, and date/time formats.
Guides on entering calibration mode and verifying the password.
Detailed steps for calibrating Measure mode, including sub-ranges, zero, and span.
Detailed steps for calibrating Source mode, including output types, zero, and span.
Displays battery status, allows password setting, and factory reset.
Lists common issues and their potential causes and solutions for the calibrator.
Step-by-step instructions for safely replacing the internal battery.
Lists key technical specs: display, weight, dimensions, battery, operating temp, impedance.
Details accuracy and resolution for mV, V, and mA for both measurement and source functions.
Highlights features like loop power output, HART compatibility, and switch test capabilities.
Provides detailed drawings and dimensions of the LC-12 calibrator's physical enclosure.
