SPECIFICATIONS
MASSEY FERGUSON
®
1635
FRAMES AND AXLES
Rear Axle
Type Flange
Tread Settings: Min - Max in (mm) 49.8 (1265) - 57.7 (1465)
Rear Axle Capacity lbs (kg) 3968 (1800)
4WD Front Axle
Steering Angle degrees 56
Drive Mechanical
Drive Shaft Shield Yes
Drive Ratio 1.61
Method of Engagement Mechanical Lever
Tread Settings in (mm) 45.7 (1160)
Front Axle Capacity lbs (kg) 3968 (1800)
THREE POINT HITCH / PTO / DRAWBAR
Three Point Hitch
ASAE Hitch Category 1
Number of Lift Cylinders 1
Controls RH Console
Type of Stabilizers Telescopic
Type of Link Ends Telescopic
Draft Sensing Optional
Lift Capacity @ 24 in: lb (kg) 2535 (1150)
Lift Capacity @ hitch point: in lb (kg) 2800 (1270)
Rear Power Take Off (PTO)
Type Independent
Speeds (rpm) 540
Control Electro Hydraulic Switch
Disconnect Control LH Console
Clutch Wet Multi Disc
Shaft Configuration in (mm) 1.37 (35)
PTO Brake Yes
Mid PTO (optional, field installed)
Type Independent
Speeds (rpm) 2000
Control Common w/ Rear PTO
Disconnect Control LH Console
Clutch Common w/ Rear PTO
Shaft Configuration in (mm) 0.98 (25)
PTO Brake Common w/ Rear PTO
NOTE: Mid & Rear PTO can be operated simultaneously or independently
Drawbar
Type Fixed
Maximum Static Load lbs (kg) 880 (400)
310-4
To Next Page
Loading...
