1 - 6
INTRODUCTION
Sect. 2 - Tractor identification and technical specifications
2-1 Tractor identification
The tractor is identified by a serial number stamped
on the rear part of the transmission housing and on
the bonnet. The engine also has its own serial num-
ber stamped on the engine block.
To ensure a quick and efficient service when ordering
spare parts or asking for technical specifications or
other information, always state the chassis and engi-
ne serial number.
Chassis serial number .............................................
Engine serial number...............................................
Cab serial number ...................................................
Type of tractor..........................................................
Owner / Operator.....................................................
Dealer's or Agent's address .....................................
................................................................................
Delivery date ...........................................................
Warranty expiry date................................................
Fig.1-1
A -Engine serial number
(engine block)
B - Chassis type and serial number
(on front radiator core)
Type and serial number of the front axle
(on axle housing).
Cab type and serial number
(on rear cab piller).
Fig.2-1
Type of tractor and chassis serial number
(lower dashboard panel).
Fig.4-1
Fig.3-1
Find manuals at https://best-manuals.com
To Next Page
Loading...
