3.6
3.6 INTRODUCTION TO SAFETY
This safety section of your Operator Instruction Book is
intended to point out some of the basic safety situations
which may be encountered during the normal operation
and maintenance of your FOOTSTEP (ROPS) tractor,
and to suggest possible ways of dealing with these
situations. This section is NOT a replacement for other
safety practices featured in other sections of this book.
Additional precautions may be necessary, depending on
attachments used and conditions at the work site or in
the service area. Massey Ferguson has no direct control
over tractor application, operation, inspection,
lubrication, or maintenance. Therefore it is YOUR
responsibility to use good safety practices in these
areas.
3.7 A WORD TO THE OPERATOR
It is YOUR responsibility to read and understand the
safety section in this book before operating your tractor.
You must follow these safety instructions that take you
step by step through your working day.
In reading this section, you will note that illustrations
have been used to highlight certain situations. Each
illustration is numbered and the same number appears
in the text in parenthesis. This number is placed at the
end of the written text that refers to the illustration.
Remember that YOU are the key to safety. Good safety
practices not only protect you, but also the people
around you. Study the features in this manual and make
them a working part of your safety programme. Keep in
mind that this safety section is written only for this type
of machine. Practice all other usual and customary safe
working precautions, and above all -
REMEMBER - SAFETY IS YOUR RESPONSIBILITY.
YOU CAN PREVENT SERIOUS INJURY OR DEATH.
Use only AGCO - Massey Ferguson approved
attachments and equipment.
To Next Page
Loading...
