EasyManua.ls Logo

MASSEY FERGUSON MF 6714 S Dyna-4 - Page 30

MASSEY FERGUSON MF 6714 S Dyna-4
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front axle
Model MF 6712 S/MF 6713 S/MF 6714
S
MF 6715 S
Suspension ram diameter 68 mm x 32 mm
Suspension ram stroke 2 x 129 mm
Hydraulic control unit brand Husco
Hydraulic control unit nominal
pressure
190 bar
Number of accumulators 2
Accumulator pressure 10 bar and 50 bar
Suspension sensor type Angular potentiometer.
Steering sensor type Angular potentiometer.
Brake type Combined with the rear brake
Factor K 1.32
Spool valves
Model All models
System type Open Center (OC)
Closed Center Load Sensing (CCLS)
Flow rate 57 l/min or 100 l/min (OC)
110 l/min (CCLS)
High-pressure pump type Bosch Rexroth gear pump(s) (OC)
Bosch Rexroth piston pump (CCLS)
High-pressure pump displacement 19 cm3 (OC 57 l/min)
19 cm3 + 14 cm3 (OC 100 l/min)
45 cm3 (CCLS)
High-pressure pump rotational speed 2980 rpm (OC)
2532 rpm (CCLS)
High-pressure pump maximum flow rate 57 l/min or 100 l/min (OC)
110 l/min (CCLS)
High-pressure pump maximum pressure 205 bar
Maximum quantity of oil to add for heavy
implements
10 l
Maximum exportable oil quantity (without adding
oil)
32 l
1. Introduction
1-8 MF 6700 S series tractors
ACT0025630

Related product manuals