Spool valves
Model All models
Maximum exportable oil quantity (adding oil) 42 l
Charge pump type Suction (OC)
71 cm3 gear pump (CCLS 110 l/min)
Main relief valve adjustment pressure 195 bar ± 5 bar (OC)
230 bar ± 5 bar (CCLS)
Number of spool valves (maximum) 4
Number of front "push-pull" connectors (maximum) 4
Number of rear "push-pull" connectors (maximum) 8
Maximum flow rate per spool valve 57 l/min or 100 l/min (OC)
100 l/min (CCLS)
Spool valve control type Mechanical or electrical
Recommended oil: According to MF CMS M 1145 specification
Steering
Model All models
Steering type Hydrostatic
Type of control Steering wheel
Orbitrol displacement 160 cm3
Steering ram diameter 68 mm x 32 mm
Steering ram stroke 2 x 129 mm
Working pressure 175 bar ± 5 bar
Pressure relief valve adjustment pressure 175 bar ± 5 bar
Shock valve adjustment pressure 240 bar ± 5 bar
Oil recommended for steering According to MF CMS M1145 specification
Rear linkage
Model All models
Lift ram diameter 75 mm
Linkage travel OC: 702 mm
CCLS: 701 mm
Maximum lifting capacity at ball joints GPA 22, GPA 22+, GPA 23: 7100 kg
1. Introduction
MF 6700 S series tractors 1-9
ACT0025630
To Next Page
Loading...
