Splitting the tractor between engine and front axle
02A01-2
MF 400 Xtra
02
02
A. Introduction
It is usually necessary to split the tractor between
the front axle and engine to service the engine
internal assemblies or components such as the
timing case.
IMPORTANT:
- All procedures involving tractor
splitting should be performed
according to the appropriate safety
precautions.
- Before splitting the tractor, make sure
all connections have been properly
disconnected between the moving
part (front end of tractor) and the fixed
part (rear end of tractor).
Fig. 1
To Next Page
Loading...
