11. RIDING
Crossing Streams
Your ATV can operate through water up to maximum
recommended depths is 4 inch
（
100mm
）
. Before fording
steams always:
1. Determine water depths and current.
2. Choose a crossing where both banks have gradual inclines.
3. Proceed slowly, avoiding rocks and obstacles if possible.
4. After crossing, dry the brakes by applying light pressure to the
lever until braking action is normal.
CAUTION
Never operating the ATV through deep or fast flowing water.
NOTE: After running the vehicle in water, it is critical your
machine is serviced as outlined in the maintenance chart see
“15.maintenance”.The following areas need special attention:
engine oil, transmission oil and all grease fittings.
To Next Page
Loading...
