15. MAINTENANCE
Wheel Installation
1. With the parking brake locked, place th wheel in the correct
position on the wheel hub. Be sure the valve stem is toward the
outside and rotation arrows on the tire point toward rotation.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
according to the chart found in
“15.MAINTENANCE/Wheel Nut Torque”.
Tire Inspection
When replacing a tire always use original equipment size and
type.
Tire Tread Depth
Always replace tires when tread depth is worn to 1/8” (3mm) or
less. Please refer to your Owner’s Manual for tire specifications.
To Next Page
Loading...
