Need help?Do you have a question about the Massive Audio NX2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 100W x 2 |
| RMS Power at 2 Ohms | 150W x 2 |
| RMS Power at 4 Ohms Bridged | 300W x 1 |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| Frequency Response | 20Hz - 20kHz |
| S/N Ratio | >90dB |
| Damping Factor | >100 |
| Low-Pass Crossover Frequency | 50Hz - 250Hz |
| High-Pass Crossover Frequency | 50Hz - 250Hz |
| Bass Boost | 0dB - 12dB @ 45Hz |
| Input Sensitivity | 200mV - 6V |
| Crossover Type | Variable |
| Fuse Rating | 25A |
Guide to connecting power, speakers, signal, and using controls like gain and filters.
Resolving power, output, noise, distortion, and overheating problems.
To Next Page
