Massive 100 Series User Manual

Hidden Console Vault
Weld-It-Yourself Kit
PN: 100HCV-K
100 Series Land Cruiser/Lexus LX470
Congratulations on your new Massive Hidden Console Vault! This instruction manual illustrates the
recommended steps to assemble your kit, but by all means feel free to build it as you see fit!
INTRODUCTION
Your kit includes the following parts:
 Lid
 Front Panel
 Rear Panel
 (2) Side Panels
 Bottom Panel
 Simplex Lock Kit
 Hinge
 Hardware Bag (6 screws, 4 washers, 2 flange nuts, lock bolt, bolt guide block)

Massive 100 Series Specifications

General

RPM	7200 RPM
Capacity	1TB, 2TB, 4TB, 8TB, 10TB
Interface	SATA 6Gb/s
Form Factor	3.5-inch
Cache	256MB

Summary

Introduction

Vault Assembly

Hinge Preparation and Initial Welding

Prepare the hinge by degreasing and tack welding one end for proper movement.

Panel Assembly and Main Welding

Assemble vault panels, tack weld them, and then perform main welding on slots and edges.

Lid/Lock Assembly

Disassemble and Assemble Lock Components

Disassemble the lock and correctly position its components (parts A, B, C) onto the lid.

Install and Secure Lock Mechanism

Clamp the bolt guide block, check lock function, and tack weld it to the lid.

Final Assembly

Attach Lid to Vault

Center and flush the lid against the hinge barrel, then plug weld it to the hinge.

Reinstall Lock and Verify Functionality

Reinstall the lock, check its fit against the lid, and verify overall lid and lock operation.