Masspower SUN-1000GTIL2-LCD User Manual

User Manual of 2
nd
Generation Grid Tie Inverter with Limiter
Grid Tie Inverter With Internal&External Limiter (GTIL)
2016-3-1 All rights reserved
1

Masspower SUN-1000GTIL2-LCD Specifications

General

Brand	Masspower
Model	SUN-1000GTIL2-LCD
Category	Inverter
Language	English

Summary

On-Grid System Using Standard Grid Tie Inverter

On-Grid System Using Grid Tie Inverter With Limiter (GTIL)

The Limiter Module-Parts Description

The LCD Display

Describes the functions of the LCD display unit, showing Utility Power, Inverter Power, and KWH readings.

AC Receptacle For GTIL AC output

Details the two AC receptacles for connecting GTIL output to the Limiter Module or directly to the grid.

Clamp Sensor

Explains how the clamp sensor connects to a hot wire to measure current and power flow.

Clamp sensor AC signal socket

Specifies the socket for connecting the AC signal from the clamp sensor to the Limiter Module.

Terminal Block- AC power to Grid

Describes the terminal block for connecting the GTIL AC output to the grid and powering the module.

Limiter DC Signal Output

Details the Limiter Module's DC signal output connections to the GTIL signal input.

WIRING DIAGRAM WITH EXTERNAL LIMITER

Installation Overview and Recommendations

Covers general installation aspects and recommendations for GTIL systems with external limiters.

Wiring and Connection Procedure

Step-by-step guide for connecting the AC clamp sensor, Limiter Module, and solar panel to the GTIL.

Installation of GTIL With Internal Limiter

Limiter Module Specification