MAINTENANCE
To clean the speaker use a dry microfiber cloth to wipe dust
away being careful not to touch the tweeter or woofers.
Do not drop, bump or allow the speaker to be exposed to water,
moisture or temperature extremes. Additionally, do not touch
the tweeter or woofers.
Only use the provided 2m power cable to connect the speaker to
a power source.
To complete a factory reset, hold down -VOL and SOURCE keys
for 4 seconds until the lights on the SOURCE key quickly flash
four times.
•
•
•
•
SETTING UP A STEREO PAIR
To return your speakers to single unit mode, hold down the PAUSE
key on either speaker for four seconds until the lights on the
SOURCE key quickly flash. The lights flashing indicates the stereo
pair has been disconnected.
- VOL + VOL PAUSE SOURCE
CAST
BT
AUX
OPT
0:04
L L
R
R
To Next Page
Loading...