J
Javier WilliamsJul 27, 2025
What to do if my Master Appliance Ultratorch UT-100Si Power Tool does not ignite?
- JJohn WeberJul 27, 2025
If your Master Appliance Power Tool doesn't ignite and has a low flame, it might be due to several reasons: * The fuel tank could be empty, in which case you should refill it with butane fuel. * The ejector might be clogged, requiring a replacement. * The fuel setting could be too high; try adjusting the switch ring or gas control lever to a lower setting. * A foreign object might be blocking the tips; clean out or replace the tips. * The fuel could be too cold; hold the unit in your hand to allow it to warm up, but do not heat the handle.