Do you have a question about the Master audio MAW218D7 and is the answer not in the manual?
Type | Subwoofer |
---|---|
Size | 8 inches |
Driver Size | 8 inches |
Impedance | 4 ohms |
Frequency Response | 30Hz - 500 Hz |
General introduction to the MAW Series, designed for Line Array configurations, highlighting its advanced technology and ideal use cases.
Details the active version of the MAW-218 system, featuring DSP control and two 18" Neodymium Woofers for excellent performance.
Describes the 18" Neodymium transducers, their clean low frequency reproduction, high sound pressure, and DDR technology for reduced distortion.
Explains the construction material (birch plywood), CNC milling, and ecological water-based acrylic resin paint for external protection and durability.
Details the connections panel on the MAW-218/D unit, listing the input and output ports for PC signal, audio, and power.
Provides detailed technical specifications for the MAW-218/D7, including input, mains, consumption, frequency response, sensitivity, and power.
Lists the main components of the MAW-218D, specifically the 2x18" Long excursion Neodymium Woofer with a 100mm Voice Coil.
Details the enclosure specifications including dimensions (Width, Height, Deep), weight, connections, material, finish, and rigging options.
Guides on how to resolve 'No Power' issues, advising to check plug and mentioning the internal breaker protection.
Steps to troubleshoot 'No Sound' problems, including checking signal, connections, output volume, and mute status.
Advice for 'Distorted sound', suggesting to reduce mixer output or channel gain due to system overload or maximum power.
Addresses 'Poor bass performance' by checking connection polarity between the mixer/processor and the amplifier's pins.
Solutions for 'Noise and Hum', recommending checking connections, cable routing, and AC circuit interference.
Instructions to check input voltage for the 'Overvoltage LED (on RED)', ensuring it is within the correct 230V +/- 10% range.