Model no. 043-1320-0 | Contact us: 1-855-803-9313
98
Removing Mineral Deposits
Hints For Great-Tasting Coee
1. A clean coee maker is essential for making great-tasting coee. Regularly clean the coee maker as
specified in the CLEANING AND MAINTENANCE section. Always use fresh, cold water in the coee
maker.
2. Store unused coee grounds in a cool, dry place. After opening a package of coee grounds, reseal it
tightly and store it in the refrigerator to maintain its freshness. For an optimum coee taste, buy whole
coee beans and finely grind them just before brewing.
3. Do not reuse coee grounds since this will greatly reduce the coee’s flavour. Reheating coee is not
recommended as coee is at its peak flavour immediately after brewing.
4. Clean the coee maker when over-extraction causes oiliness. Small oil droplets on the surface of
brewed, black coee are due to the extraction of oils from the coee grounds. Oiliness may occur more
frequently if heavily-roasted coees are used.
Limited Warranty
1-Year Limited Warranty
This product carries a one (1) year warranty against defects in workmanship and materials.
If found defective, return to place of purchase, with proof of purchase.
This product is not guaranteed against wear, misuse and/or abuse.
CAUTION:
Be sure to unplug this appliance before cleaning. To protect against
electric shock, do not immerse cord, plug or unit in water or liquid. After each use,
always make sure plug is first removed from wall outlet.
Cleaning and Maintenance
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3) Water droplets may build up in the area above the funnel and drip onto the product base during
brewing. To control the dripping, wipe o the area with a clean, dry cloth after each use of the
product.
4) Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
To keep your coee maker operating eciently, clean away the mineral deposits left by the water
regularly depending on the water quality in your area and the frequency with which you use the
appliance. To remove mineral deposits:
1. Fill the water tank with water and descaler to the MAX level as indicated in the water tank. Please
use “household descaler” at the ratio recommended in the descaler instructions (generally 4:1).
Citric acid can also be used instead of descaler at a ratio of the 100 parts of water to 3 parts of
citric acid.
2. Put the carafe on the warming plate and ensure it is placed in position.
3. Press the ON/OFF button once to start the brewing process.
4. After one cup of water flows into the carafe, switch o the appliance by pressing the ON/OFF
button again to stop the brewing process.
5. Leave the solution to work for 15 minutes. Repeat steps 3–5 again.
6. Turn the appliance on by pressing the ON/OFF button once and run until the water tank is
completely empty.
7. Rinse by operating the appliance with plain water at least 3 times.
Warranty
V810-C2181301_CM1055TA-UL_英文版说明书.indd 8-9 2018/4/26 11:38:20