Model no. 043-5773-8 | Contact us: 1-855-803-9313
76
TM
Using your blender
Before the first use, clean the blender according to the section of “quick cleaning”.
The running time of the unit without food or liquids should not exceed 15 seconds.
Important: Blades are very sharp, handle with care. Ensure that the hand blender is unplugged
from the power outlet before attaching or removing parts.
Instructions for blender
Maximum operation time should not exceed 60 seconds. Rest 1 minute between two consecutive
blending cycles.
1. To assemble the detachable shaft with the motor unit, turn the shaft in a counter-clockwise direction
until tightened. To disassemble, turn in clockwise direction.
2. Plug the hand blender in to a power outlet.
3. Lower the hand blender into food and depress the switch at the top of the motor unit.
4. To stop the hand blender, release the switch at the top of the motor unit.
Instructions for chopper
Maximum operation time should not exceed 30 seconds. Rest 1 minute between two consecutive
blending cycles.
1. Place the chopper bowl on a clean, level surface.
2. Assemble the stainless steel chopping blade into the chopper bowl (see Fig.1).
3. Attach the connect
or on the chopping blade (see Fig.2).
4. Place food into the chopper bowl.
5. Attach the lid onto the chopper bowl and turn it in a clockwise direction until it locks into position.
(See Fig.2.) To detach the lid, turn in a counter-clockwise direction.
6. Insert the top part of the chopper into the hole of the chopper lid, and turn it in a clockwise direction to
lock. (See Fig.3)
7. Plug the appliance into a power outlet and depress the switch to begin operation.
8. To stop the appliance release the switch at the top of the motor unit.
Caution: To reduce the risk of injury, never place cutting blade on base without first
placing bowl properly in place.
Caution: Ensure the chopper lid is securely locked in place before operating
appliance.
Instructions for whisk
Maximum operation time should not exceed 1 minute . Rest 1 minute between two consecutive
blending cycles.
1. To assemble whisk to the motor unit, turn the whisk in a counter-clockwise direction until
tightened. To disassemble, turn in a clockwise direction.
2. Plug the hand blender into a power outlet.
3. Place egg white into the cup. Generally, 2 eggs whites is sucient.
4. Lower the hand blender into food and depress the switch at the top of the motor unit.
5. To stop the hand blender release the switch at the top of the motor unit.
Fig.1 Fig.2 Fig.3
NOTE: When chopping meat, remove all bones and cut meat into small pieces. Place
meat into chopper bowl. Max quantity of meat is 200 g (7 1/2 oz).
Using Your Hand Blender
Using Your Hand Blender
V81 暂时无单号 HB6036K-UL 说明书.indd 6-7 2019/1/22 13:55:40
Wall bracket
Hook the blender or detachable
shaft in larger opening after using.