To Next PageTo Next PageWhy is my Master-force Impact Driver motor overheating?
The motor of your Master-force Impact Driver might be overheating because the cooling vents are blocked by dust or other obstacles. To resolve this, clean and clear the vents, and avoid covering them with your hand during operation.
General| Brand | Master-force |
|---|---|
| Model | 241-0424 |
| Category | Impact Driver |
| Language | English |
Defines DANGER, WARNING, and CAUTION symbols and their implications for user safety.
Provides detailed explanations for various safety symbols used on the tool and in the manual.
Covers work area, electrical, personal safety, and general tool use and care guidelines.
Details safety rules for battery operation, maintenance, and specific precautions for the impact wrench.
Identifies key features and components of the 18.0-Volt Lithium-Ion Impact Wrench.
Lists technical details such as motor, speed, torque, weight, and battery voltage.
Step-by-step instructions for connecting and removing the battery pack from the tool.
Explains how to operate the variable speed trigger and the forward/reverse/lock selector.
Guides on how to attach and detach sockets from the impact wrench's output drive.
Instructions for using the tool to tighten or loosen fasteners, including torque considerations.
Provides guidelines for cleaning and maintaining the tool, emphasizing safety precautions.
Lists common problems, their causes, and suggested solutions for the impact wrench.
Outlines the terms, coverage, exclusions, and duration of the product warranty.
