To Next PageTo Next Page
Need help?Do you have a question about the Master Pro MHP-215-KFA and is the answer not in the manual?
Read and understand all instructions before operating or servicing the heater to prevent fire, explosion, or injury.
Heater is for outdoor use or well-ventilated indoor areas only to prevent asphyxiation or CO poisoning.
Covers general fire/explosion hazards, fuel misuse, and hot heater precautions.
Use grounded outlets/cords, appropriate voltage, and keep away from water.
Addresses indoor air pollution, CO poisoning symptoms, and ventilation needs.
Notes on California (lead), Massachusetts (habitation use), and New York City (space heating) regulations.
Specifies minimum clearances from combustibles and requires a level surface for placement.
Read and understand all instructions to prevent death, injury, or property damage from hazards.
Details ratings, fuel consumption, tank capacity, pump pressure, voltage, amps, and phase for different models.
Diagram identifying key components like hot air outlet, fuel tank, thermostat knob, and power switch.
Lists required tools and checks the contents of the box before assembly.
Details attaching wheels, spacers, axle nuts, and the wheel support frame.
Describes attaching the front and rear handles and Y-brackets to the heater assembly.
Recommends 1-K kerosene, lists approved fuels, and warns against improper fueling or fuel types.
Emphasizes need for fresh air opening to prevent CO poisoning, specifying minimum openings per Btu/Hr.
Step-by-step guide to filling, connecting power, setting thermostat, and starting the heater.
Provides tips for when the heater fails to ignite, suggesting thermostat adjustment or checking connections.
Explains the room temperature and running time display, including LO/HI indicators.
Instructions on how to safely stop the heater and restart it after a pause.
Emphasizes safety during service, using qualified personnel, and original parts.
Details draining, rinsing, and replacing the fuel tank drain plug for storage or cleaning.
Recommends cleaning/replacing intake, output, and lint filters based on operating hours or conditions.
Instructs on cleaning fan blades with a damp cloth, ensuring they are dry before use.
Details cleaning and re-gapping the spark plug every 600 hours for optimal performance.
Recommends cleaning fuel filters twice per season and photocells seasonally.
Explains how to adjust pump pressure using the adjusting screw for different models.
Recommends cleaning or replacing nozzles seasonally, or more often if contaminated fuel is used.
Provides a schematic of the heater's internal wiring and component connections.
Lists common issues like ignition failure, no operation, poor combustion, and provides possible causes and solutions.
Diagram showing all parts of the heater disassembled, with numbers for reference.
Lists all replaceable parts with their corresponding part numbers for each model.
Details the one-year warranty, exclusions, limitations, and responsibilities of the purchaser.
Instructions on registering the product online and locating the serial number for claims.
General| Brand | Master Pro |
|---|---|
| Model | MHP-215-KFA |
| Category | Heater |
| Language | English |
