9 10
Clock Settings: Users can adjust the time and date by themselves, or connect the mirror to the phone via WIFI, the time will be updated
automatically.
Flicker: Can set “50Hz / 60Hz”.
Each country has different supply frequency due to geographical reason. Standard frequency of dash camera lens is constant 50Hz.
When the supply frequency inconsistent with frequency standard the image on the device will appear joggling phenomenon. At this
point users should adjust Frequency to consistent with supply frequency.
Reset Setup: After making a lot of custom settings,users can reset the device to the original factory settings.
Format SD-Card: If it’s not necessary to save the videos in card, user can delate all videos (both normal video and event les) by
formatting.
Parking Monitoring: Can set “Off /On”.
When this function is turned on, when the recorder is shaken when it is turned off, it will start the machine to record for 30 seconds and
then turn it off.
Language:
“
English / Simplied Chinese / Traditional Chinese”etc. There are 8 languages.
LCD Power Save: Can set “off / 1min / 3mins”.
After exiting the menu, the mirror will start to count the time once there are no operations. The screen will auto turn off when it reaches
the time you set.
Parking Monitoring
Off
On
LCD Power Save
Language
Volume
15:30
TUE
2019.12.03
Volume:
Can set “
Off / High / Middle / Low”, default Middle.
Flicker
50 Hz
60 Hz
Clock Settings
Wifi ON/OFF
Format SD-Card
15:30
TUE
2019.12.03
Wifi ON/OFF: Can set “On / Off”.
To Next Page
Loading...