GENERAL SAFETY PRECAUTIONS
USAGE
Use rebar bender on concrete re-inforcing bars only.
RESRICT USE TO DESIGNATED MATERIALS
Don’t use the machine to bend very hard rebar.The hard rebar may
break and will also damage the tool. Do not attempt to bend rebars.
Harder,thicker or thinner than those specified (see page 5).
USE EYE PROTECTION
Wear safety goggles,safety glasses with side shields or a face shield
while using bender.
PROVIDE SAFETY BARRIERS
Erect safety screens to protect co-workers from possible flying
ends.Place safety screen under the rebar when working in high places.
GUARD AGAINST ELECTRIC SHOCK
To avoid possible electric shock,do not handle bender with wet hands
or use bender in the rain or damp places.Be aware of all power
lines,electric circuits and other hazards that may be
contacted,especially those that are below the surface or otherwise
hidden from view
UNPLUG TOOL
To Next Page
Loading...
Need help?
General
