Master NRB-25 - User Manual

1
OPERATION MANUAL
RB16 25 32 Portable Rebar Bender
P E R F O R M A N C E · E F F I C I E N T · R E L I A B L E
Master sincerely thanks you for selecting the Concrete Cutting Machine.
For your Safety and proper operation, before you start to operate or carry
out any maintenance on this equipment, YOU MUST READ and STUDY
this manual carefully. Be sure to always keep it ready for reference.
Produced By Henan Master Machinery Co.,Ltd

Master NRB-25 Specifications

General

Brand	Master
Model	NRB-25
Category	Construction Equipment
Language	English

Summary

General Safety Precautions

Usage Guidelines

Use rebar bender exclusively on concrete re-inforcing bars.

Restricted Materials

Do not use the machine for very hard, or incorrectly sized rebar.

Eye Protection

Safety Barriers

Electrical Shock Prevention

Avoid shock; do not handle with wet hands or use in damp areas. Be aware of electrical hazards.

Environmental Awareness

Proper Apparel

Maintenance and Storage

Operating Instructions

Pre-Use Checks

Check oil level, bender blocks, bolts, power source, earthing, cord, and plug before operation.

Extension Cable Requirements

Points of Attention

Ventilation and Overheating

Power Loss and Motor Heat

Operation Modes

Push Mode (Mode A)

Pull Mode (Mode B)

Maintenance: Oil Level Check

Hydraulic Oil Precautions

Flammability and Contact

Hydraulic oil is flammable. Keep away from flames. Avoid eye/skin contact; rinse thoroughly.

Topping Up Oil

Oil Change Procedure

Carbon Brushes Inspection