• Attach Control Panel (A) to outer
shield using mounting bracket.
• Make sure the Control Panel
(A) is correctly attached or
appliance will not work. There
is a built-in safety switch in
mounting bracket in the
Control Panel (A).
• Clean plug, element and control panel with a damp cloth or sponge
using a mild soap. All non-electric parts are dishwasher safe.
• When appliance is not in use, it must be unplugged from power supply.
6
• Turn appliance off, unplug and let cool for 2 hours if using water,
5 hours if using oil before cleaning or storing.
• Unused oil can be stored in appliance. Do not store water in appliance.
Storage & Maintenance
WARNING: Do not place
fryer control panel under
running water.
Immersing control panel
and cord can cause
electrocution.
CAUTION: Do not
pour used oil in
the sink. Drain it
into a receptacle.
CAUTION:
Hold inner pot in
with thumbs while
pouring.
WARNING:
Do not use the appliance
without water or oil. It can
be severely damaged if
heated while empty.
3
Getting Ready
• If desired, dismantle appliance for cleaning before initial use. Once unit
is properly assembled, it can be used for frying, boiling and steaming.
• Clean the lid, inner pot, outer shield and basket with a damp cloth or sponge
using a mild detergent. These parts can also be cleaned in the dishwasher.
• Clean cord, control panel and element with a damp cloth or sponge using a
mild detergent. Never clean plug, cord, and control panel in the dishwasher.
• Dry thoroughly.
WARNING:
Do not immerse the control
panel or cord in water.
NOTE:
There is a built-in safety
trigger in the slots. Make
sure slots are aligned to
the mounting bracket, or
unit will not turn on.
Mounting
Bracket
DANGER:
Disconnect electric
cord from outlet,before
cleaning, servicing and/
or removing heating
element. Electrical
shock can result in
personal injury or death.
TOP OF
CONTROL
PANEL
To Next Page
Loading...