15www.mastercool.com
E-PRINTED SAMPLE (emailed summary)
• MAINTENANCE: This will display the required routine maintenance (tank filling, purge, filter change,
utilities, hose flushing, system tools, identification and update) that needs to be performed
o TANK FILLING: Internal tank filling is preset to 15 pounds for optimal machine performance.
This operation will be performed in the initial set up of the machine and whenever additional
refrigerant is required. Refer to tank filling in the set up instructions
o PURGE: The purge feature allows the machine to manually purge NCG (air) from the
internal storage tank. The operator can manually start the purge process and the machine
will automatically stop when purge is complete. The machine also routinely performs this
operation, automatically during the recovery process.
o FILTER CHANGE: The percentage of filter life can be viewed in the status screen. To change
the internal filter, follow the instructions on the screen
CAUTION: Please wear protective gloves and goggles to avoid a personal injury.
The filter should be changed quickly to avoid moisture entering the system. The new filter
will come with a thumb drive that will be placed into the USB connection on the front of the
machine. This will activate the new filter. Please read and understand the instructions that
come with the new filter and thumb drive before starting the filter change process.
o UTILITIES: The machine has a conversion chart that will allow for the quick and easy
conversion between units of measure and a logs tool which allows access to previously stored
information.
To Next Page
Loading...
Need help?
General
