MasterCraft 054-4605-0

Fig. 1
General safety rules
WARNING: Read and understand all
instructions.
Work area
Electrical safety
Personal safety
Use and care of power tools
Service
Specific safety rules
WARNING:
WARNING:
WARNING:
Replacing the engraving tip
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE



!
s
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use.
Should this product be passed on to a third
party, this instruction manual must be included.
INSTRUCTION MANUAL
ELECTRIC
ENGRAVER
054-4605-0
!
!
!

MasterCraft 054-4605-0 Specifications

General

Corded/Cordless	Corded
Variable Speed	Yes
Voltage	120V
Speed	8, 000 - 30, 000 RPM
Collet Size	1/8 inch
Cord Length	6 feet
Power	1.2 A

Summary

General Safety Rules

Work Area Safety

Maintain a clean, well-lit workspace and avoid explosive environments. Keep bystanders away.

Electrical Safety Precautions

Understand double insulation, polarized plugs, and avoid wet conditions to prevent electric shock.

Limited Warranty Information

Warranty Conditions and Limitations

Details requirements for warranty claims, including proof of purchase and exclusions.

Additional Warranty Limitations

Outlines further restrictions and exclusions to the product's warranty coverage.

Notice to Consumer Regarding Rights

Informs consumers of their specific legal rights and how they may vary by province.