EasyManuals Logo

MasterCraft 055-3505-2 User Manual

MasterCraft 055-3505-2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
4 5
model no. 055-3505-2 | contact us 1-800-689-9928
SPECIFICATIONS
SAFETY GUIDELINES
SPECIFICATIONS
Safety is a combination of common sense , staying alert, and knowing how the wet/dry sharpener works.
1. READ this entire Instruction Manual and become familiar with the information that it contains . Learn
the applications,limitations, and possible hazards associated with wet/dry sharpener.
2. AVOID DANGEROUS CONDITIONS. DO NOT use power tools in wet or damp areas, and DO NOT
expose them to rain. Keep the work area well lit.
3. DO NOT use power tools in the presence of flammable liquids or gases.
4. ALWAYS keep your work area clean, uncluttered, and well-lit. DO NOT work on a floor surface that is
slippery from sawdust or wax.
5. KEEP BYSTANDERS AT A SAFE DISTANCE FROM the work area, especially when the tool is in use.
Do not allow children or pets near the wet/dry sharpener.
6. DO NOT FORCE THE TOOL to do a job that it was not designed to do.
7. DRESS FOR SAFETY. DO NOT wear loose clothing, gloves, neckties, or jewellery (rings, watches, etc.)
when operating the tool. Loose clothing and other items can get caught in moving parts and draw the
operator in. Wear non-slip footwear, and tie back long hair.
8. WEAR A FACE MASK OR DUST MASK, because the sharpening operation produce dust.
9. UNPLUG the power cord plug from the electrical outlet when making adjustments, changing parts,
cleaning, or working on the tool.
10. KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.
11. AVOID ACCIDENTAL START-UPS. Verify that power switch is in the OFF position before plugging in
the power cord.
12. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant, rubber-soled
footwear. Keep the floor clear of oil,scraps, and other debris.
13. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow
instructions for lubricating and changing accessories.
MODEL NUMBER 055-3505-2
MOTOR 120 V AC, 60 Hz, 0.8 A
WET WHEEL
Speed 170 RPM (no load)
Size 4 x 2” (10.2 x 5.1 cm), 220 grit
DRY WHEEL
Speed 1,750 RPM (no load)
Size 4 1/2 x 3/4” (11.4 x 1.9 cm), 36 grit
ARBOUR SIZE 1/2” (1.27 cm)
WEIGHT 12 lb (5.4 kg)
WARNING!
In order to avoid mistakes that could cause serious injury, read the following steps carefully and
understand them thoroughly before plugging in the wet/dry sharpener.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 055-3505-2 and is the answer not in the manual?

MasterCraft 055-3505-2 Specifications

General IconGeneral
BrandMasterCraft
Model055-3505-2
CategoryPower Tool
LanguageEnglish

Related product manuals