IMPORTANT INFORMATION
AIR-POWERED STAPLER 058-8132-2
11
Compatible compressors
GUIDELINES FOR PROPER USE AND OPERATION
Be sure to use a proper air compressor with Mastercraft
®
air-powered tools. The compressor should
be able to supply a minimal air delivery of 2.65 SCFM @ 90 PSI to ensure the compressor can run
continuously with the Mastercraft Air-powered Stapler.
General use
This Mastercraft
®
Air-powered Stapler drives 18-gauge 13 to 25 mm (1/2 to 1") staples. The stapler
magazine accepts staples without adjustment. The tool has a die cast aluminum body which is both
strong and lightweight, and a comfort grip rubber handle for improved control and comfort even
during extended use. It features a 360º air deflector for air exhaust. It is best suited for installing
door and window trim, decorative trim, small cabinet work, and finish.
Air compressor
size and power
1/3–1 1/3 HP 1 1/2 HP 2+ HP
2–6 Gallons
Light-duty and
intermittent use
Light-duty and
intermittent use
Light-duty and
intermittent use
8–11 Gallons
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
15+ Gallons
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Heavy-duty and
continuous use
Wood density Nail size Compressor air pressure
>0.6 g/cm
3
<19 mm staples 90 PSI
≥19 mm staples 100 PSI
≤0.6 g/cm
3
<19 mm staples 70 PSI
≥19 mm staples 90 PSI
To Next Page
Loading...
