Need help?Do you have a question about the MasterCraft 054-6908-8 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Voltage | 120 V |
| No Load Speed | 11, 000 RPM |
| Spindle Thread | 5/8 in - 11 UNC |
| Wheel Diameter | 4.5 inches |
| Arbor Size | 7/8 in |
General warnings for power tool safety, including shock, fire, and injury risks.
Detailed safety instructions and symbol definitions specific to operating electric routers.
Detailed instructions for setting and adjusting the router's cutting depth using rough and micro-fine adjustments.
Guidance on correct feed direction for external/internal cuts to prevent kickback and ensure control.
Step-by-step guide for inspecting and replacing worn carbon brushes in the router motor.
To Next Page