Need help?Do you have a question about the MasterCraft 054-8251-6 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Voltage | 120V |
| Amperage | 15A |
| Blade Size | 7-1/4 inches |
| Max Cutting Depth at 45° | 1-3/4 inches |
| No Load Speed | 5500 RPM |
| Arbor Size | 5/8 inches |
| Max Cutting Depth at 90° | 2-7/16 inches |
Guidelines for maintaining a safe and clean work environment.
Rules for safe electrical connections and handling to prevent shock.
Recommendations for operator attentiveness and protective gear.
Proper usage, maintenance, and storage of the power tool.
Guidance on when and how to get the tool serviced.
Detailed safety advice tailored to the multi-crafter's operation.
Identifies key parts like the On/Off switch and variable-speed dial.
Instructions on how to turn the tool on and off safely.
Explains how to adjust the tool's speed for different tasks.
How to securely attach and position various tool accessories.
Procedures for attaching the sanding pad and sandpaper.
Instructions for mounting DREMEL accessories using the adaptor.
Guidance on effective cutting and scraping with the tool.
Tips for effective sanding, including pressure and motion.
Advice on choosing the appropriate tool for specific applications.
Essential checks to perform before operating the tool.
Solutions for common problems encountered with the tool.
Visual representation of the tool's parts for identification.
To Next Page