MasterCraft 054-8251-6 User Manual

CORDED MULTI-CRAFTER KIT - 054-8251-6CORDED MULTI-CRAFTER KIT - 054-8251-6
7 8
• Wearearprotectionwhenusingthemulti-crafter. Exposure to noise can cause hearing loss.
• Keepyourhandsawayfromthemotorhousingvents. Hot gas comes from the vents during
operation.
• Donotusesandingpaperlargerthanneeded. Extra paper extending beyond the sanding pad
can cause serious lacerations.
• Wearprotectivegloveswhenchangingcuttingtools. Cutting tools become hot after prolonged
use.
• Keephandsawayfromthecuttingrange. Do not reach under the workpiece. Contact with the
blade can lead to injuries.
Contents:
Multi-crafter, 2 pcs flush-cutting saw blades, segmented saw blade, flexible scraper blade, sanding
pad, 5 pcs sanding paper (2 pcs 60 grit, 2 pcs 80 grit, 1 pc 120 grit), additional adaptor for fitting
DREMEL
®
accessories, hex key and instruction manual.
WARNING!
Remove the multi-crafter from the package and examine it carefully. Do not discard the
carton or any packaging material until all parts have been examined.
SAFETY GUIDELINES
Safety guidelines for multi-crafter
• Holdpowertoolsbyinsulatedgrippingsurfaceswhenperforminganoperationwherethe
toolmaycontacthiddenwiringoritsowncord. Contact with a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
• Thelabelonyourtoolmayincludethefollowingsymbols.Thesymbolsandtheir
denitionsareasfollows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
• Securetheworkpiece. A workpiece clamped with clamping devices or in a vice is held more
secure than by hand.
• Wearprotectivegloveswhenchangingcuttingtools. Cutting tools become hot after prolonged
usage.
• Alwaysweareyeprotection.
• Takeprotectivemeasureswhendustthatisharmfultoone’shealth,combustibleor
explosivecandevelopduringworking. Example: Some dusts are regarded as carcinogenic.
Wear a dust mask.
• Usethemachineonlyfordrysanding. Penetration of water into the machine increases the risk
of an electric shock.
• Asuitablebreathingrespiratormustbewornwhilesandingleadpaint,somewoodsand
metaltoavoidbreathingtheharmful/toxicdustorair.
SAFETY GUIDELINES

MasterCraft 054-8251-6 Specifications

General

Brand	MasterCraft
Model	054-8251-6
Category	Power Tool
Language	English